2015 كاتربيلر 930M
نظرة عامة
الإبلاغ عن مشكلة مع الإعلان
إرشادات السلامة
الوصف
2015 Caterpillar 930M, Caterpillar C7.1 Acert 154 HP engine, Weight 13.994T, Steering mode KL, Transport Length 7.53 M, Transport Height 2.54 M, Transport Height 3.669 M, Lifting Force 121.27 KN, Max torque 7.1L.
The Cat 930M Small Wheel Loader sets the standard for productivity, fuel efficiency and operator comfort. The improved optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar with the parallelism and load handling capability of a tool carrier. A high torque, low speed C7.1 ACERT engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. Meets Tier 4 Final/Stage V emission standards with an environmentally friendly, Clean Emission Module designed to manage itself so you can concentrate on your work. Experience the new industry benchmark.
Specifications
Engine
Displacement
427cu in
Bore
4in
Stroke
5in
Emissions
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Engine Model
Cat C7.1 ACERT
Maximum Gross Power
164hp
Rated Net Power
157hp
Operational
Operating Weight
30879lb
Power Train
Front Axle
Fixed
Rear Axle
Oscillating
Front Axle - Traction Aid - Standard
Locking differential
Rear Axle - Traction Aid - Optional
Limited slip differential
Brakes - Parking
Spring applied hydraulically released
Brakes - Service
Inboard wet disc
Rear Axle - Oscillation Angle By Tire Size - 20.5 R25, 550/65, 600/65, 650/65
10.5 degrees
Rear Axle - Oscillation Angle By Tire Size - Solid Tires, 750/65, 620/65, Skidder
7 degrees
Steering
Maximum Working Pressure - Steering Pump
3500 psi
Steering Cylinder, Double Acting - Bore Diameter
2.8in
Steering Cylinder, Double Acting - Rod Diameter
1.6in
Steering Cylinder, Double Acting - Stroke
17.2in
Maximum Steering Torque - 0 Degrees (Straight Machine)
37155lb ft
Maximum Flow - Steering Pump
34 gal/min
Maximum Steering Torque - 40 Degrees (Full Turn)
27747lb ft
Steering Cycle Times - Full Left To Full Right - Minimum Rpm: Pump Flow Limited
2.8 s
Steering Cycle Times - Full Left To Full Right - Maximum Rpm: 90 Rpm Steering Wheel Speed
2.4 s
Transmission
Forward And Reverse - Range 1*
1-13 km/h (0.6-8 mph)
Forward And Reverse - Range 2
8mph
Forward And Reverse - Range 3
17mph
Forward And Reverse - Range 4
25mph
Buckets
Bucket Capacities
2.1-5.0 m3 (2.7-6.5 yd3)
Operating Specifications
Full Turn Tip Load
18670lb
Service Refill Capacities
Cooling System
7.9gal
Fuel Tank
51.5gal
Hydraulic Tank
23.8gal
Hydraulic System - Including Tank
43.6gal
Engine Crankcase
5.3gal
Transmission - Gear Box
2.2gal
Diesel Exhaust Fluid (Def) Tank
5gal
Front Axles
6.9gal
Rear Axles
6.6gal
*Hours as of Oct 2020*
The Cat 930M Small Wheel Loader sets the standard for productivity, fuel efficiency and operator comfort. The improved optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar with the parallelism and load handling capability of a tool carrier. A high torque, low speed C7.1 ACERT engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. Meets Tier 4 Final/Stage V emission standards with an environmentally friendly, Clean Emission Module designed to manage itself so you can concentrate on your work. Experience the new industry benchmark.
Specifications
Engine
Displacement
427cu in
Bore
4in
Stroke
5in
Emissions
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Engine Model
Cat C7.1 ACERT
Maximum Gross Power
164hp
Rated Net Power
157hp
Operational
Operating Weight
30879lb
Power Train
Front Axle
Fixed
Rear Axle
Oscillating
Front Axle - Traction Aid - Standard
Locking differential
Rear Axle - Traction Aid - Optional
Limited slip differential
Brakes - Parking
Spring applied hydraulically released
Brakes - Service
Inboard wet disc
Rear Axle - Oscillation Angle By Tire Size - 20.5 R25, 550/65, 600/65, 650/65
10.5 degrees
Rear Axle - Oscillation Angle By Tire Size - Solid Tires, 750/65, 620/65, Skidder
7 degrees
Steering
Maximum Working Pressure - Steering Pump
3500 psi
Steering Cylinder, Double Acting - Bore Diameter
2.8in
Steering Cylinder, Double Acting - Rod Diameter
1.6in
Steering Cylinder, Double Acting - Stroke
17.2in
Maximum Steering Torque - 0 Degrees (Straight Machine)
37155lb ft
Maximum Flow - Steering Pump
34 gal/min
Maximum Steering Torque - 40 Degrees (Full Turn)
27747lb ft
Steering Cycle Times - Full Left To Full Right - Minimum Rpm: Pump Flow Limited
2.8 s
Steering Cycle Times - Full Left To Full Right - Maximum Rpm: 90 Rpm Steering Wheel Speed
2.4 s
Transmission
Forward And Reverse - Range 1*
1-13 km/h (0.6-8 mph)
Forward And Reverse - Range 2
8mph
Forward And Reverse - Range 3
17mph
Forward And Reverse - Range 4
25mph
Buckets
Bucket Capacities
2.1-5.0 m3 (2.7-6.5 yd3)
Operating Specifications
Full Turn Tip Load
18670lb
Service Refill Capacities
Cooling System
7.9gal
Fuel Tank
51.5gal
Hydraulic Tank
23.8gal
Hydraulic System - Including Tank
43.6gal
Engine Crankcase
5.3gal
Transmission - Gear Box
2.2gal
Diesel Exhaust Fluid (Def) Tank
5gal
Front Axles
6.9gal
Rear Axles
6.6gal
*Hours as of Oct 2020*
2015 Caterpillar 930M, Caterpillar C7.1 Acert 154 HP engine, Weight 13.994T, Steering mode KL, Transport Length 7.53 M, Transport Height 2.54 M, Transport Height 3.669 M, Lifting Force 121.27 KN, Max torque 7.1L.
The Cat 930M Small Wheel Loader sets the standard for productivity, fuel efficiency and operator comfort. The improved optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar with the parallelism and load handling capability of a tool carrier. A high torque, low speed C7.1 ACERT engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. Meets Tier 4 Final/Stage V emission standards with an environmentally friendly, Clean Emission Module designed to manage itself so you can concentrate on your work. Experience the new industry benchmark.
Specifications
Engine
Displacement
427cu in
Bore
4in
Stroke
5in
Emissions
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Engine Model
Cat C7.1 ACERT
Maximum Gross Power
164hp
Rated Net Power
157hp
Operational
Operating Weight
30879lb
Power Train
Front Axle
Fixed
Rear Axle
Oscillating
Front Axle - Traction Aid - Standard
Locking differential
Rear Axle - Traction Aid - Optional
Limited slip differential
Brakes - Parking
Spring applied hydraulically released
Brakes - Service
Inboard wet disc
Rear Axle - Oscillation Angle By Tire Size - 20.5 R25, 550/65, 600/65, 650/65
10.5 degrees
Rear Axle - Oscillation Angle By Tire Size - Solid Tires, 750/65, 620/65, Skidder
7 degrees
Steering
Maximum Working Pressure - Steering Pump
3500 psi
Steering Cylinder, Double Acting - Bore Diameter
2.8in
Steering Cylinder, Double Acting - Rod Diameter
1.6in
Steering Cylinder, Double Acting - Stroke
17.2in
Maximum Steering Torque - 0 Degrees (Straight Machine)
37155lb ft
Maximum Flow - Steering Pump
34 gal/min
Maximum Steering Torque - 40 Degrees (Full Turn)
27747lb ft
Steering Cycle Times - Full Left To Full Right - Minimum Rpm: Pump Flow Limited
2.8 s
Steering Cycle Times - Full Left To Full Right - Maximum Rpm: 90 Rpm Steering Wheel Speed
2.4 s
Transmission
Forward And Reverse - Range 1*
1-13 km/h (0.6-8 mph)
Forward And Reverse - Range 2
8mph
Forward And Reverse - Range 3
17mph
Forward And Reverse - Range 4
25mph
Buckets
Bucket Capacities
2.1-5.0 m3 (2.7-6.5 yd3)
Operating Specifications
Full Turn Tip Load
18670lb
Service Refill Capacities
Cooling System
7.9gal
Fuel Tank
51.5gal
Hydraulic Tank
23.8gal
Hydraulic System - Including Tank
43.6gal
Engine Crankcase
5.3gal
Transmission - Gear Box
2.2gal
Diesel Exhaust Fluid (Def) Tank
5gal
Front Axles
6.9gal
Rear Axles
6.6gal
*Hours as of Oct 2020*
The Cat 930M Small Wheel Loader sets the standard for productivity, fuel efficiency and operator comfort. The improved optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar with the parallelism and load handling capability of a tool carrier. A high torque, low speed C7.1 ACERT engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. Meets Tier 4 Final/Stage V emission standards with an environmentally friendly, Clean Emission Module designed to manage itself so you can concentrate on your work. Experience the new industry benchmark.
Specifications
Engine
Displacement
427cu in
Bore
4in
Stroke
5in
Emissions
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Engine Model
Cat C7.1 ACERT
Maximum Gross Power
164hp
Rated Net Power
157hp
Operational
Operating Weight
30879lb
Power Train
Front Axle
Fixed
Rear Axle
Oscillating
Front Axle - Traction Aid - Standard
Locking differential
Rear Axle - Traction Aid - Optional
Limited slip differential
Brakes - Parking
Spring applied hydraulically released
Brakes - Service
Inboard wet disc
Rear Axle - Oscillation Angle By Tire Size - 20.5 R25, 550/65, 600/65, 650/65
10.5 degrees
Rear Axle - Oscillation Angle By Tire Size - Solid Tires, 750/65, 620/65, Skidder
7 degrees
Steering
Maximum Working Pressure - Steering Pump
3500 psi
Steering Cylinder, Double Acting - Bore Diameter
2.8in
Steering Cylinder, Double Acting - Rod Diameter
1.6in
Steering Cylinder, Double Acting - Stroke
17.2in
Maximum Steering Torque - 0 Degrees (Straight Machine)
37155lb ft
Maximum Flow - Steering Pump
34 gal/min
Maximum Steering Torque - 40 Degrees (Full Turn)
27747lb ft
Steering Cycle Times - Full Left To Full Right - Minimum Rpm: Pump Flow Limited
2.8 s
Steering Cycle Times - Full Left To Full Right - Maximum Rpm: 90 Rpm Steering Wheel Speed
2.4 s
Transmission
Forward And Reverse - Range 1*
1-13 km/h (0.6-8 mph)
Forward And Reverse - Range 2
8mph
Forward And Reverse - Range 3
17mph
Forward And Reverse - Range 4
25mph
Buckets
Bucket Capacities
2.1-5.0 m3 (2.7-6.5 yd3)
Operating Specifications
Full Turn Tip Load
18670lb
Service Refill Capacities
Cooling System
7.9gal
Fuel Tank
51.5gal
Hydraulic Tank
23.8gal
Hydraulic System - Including Tank
43.6gal
Engine Crankcase
5.3gal
Transmission - Gear Box
2.2gal
Diesel Exhaust Fluid (Def) Tank
5gal
Front Axles
6.9gal
Rear Axles
6.6gal
*Hours as of Oct 2020*
